Expert system for flexing eyebrows and eyelashes ELAN - SUPERSONIC 2.0 CLEAR - Serum 1 (GREEN), 10 ml

The transparent product — "Serum 1" is intended for the FIRST stage of the eyebrow and eyelash flexing procedure. The combination of two types of relaxants and two types of alkalizers in the product allows "Serum 1" to quickly and effectively remodel disulfide bonds in the hairs. Due to this, the flexing procedure time is reduced.

During the procedure, the hairs are protected from dehydration and brittleness, which is facilitated by a care complex based on keratin and collagen.

How "Serum 1" works:

- opens the scales and ensures the penetration of active ingredients into the hairs, due to the combination of two types of alkalizers in "Serum 1" — AMMONIUM HYDROXIDE and ETHANOLAMINE;

- affects disulfide bonds, very quickly and effectively remodels and changes the shape of the hairs. This happens due to the combination of two types of relaxants — THIOGLYCOLIC ACID and CYSTEAMINE HCL;

- protects the protein structures of eyebrow and eyelash hairs during the procedure, prevents their dehydration and fragility, and retains moisture in them. This is due to the presence of a care product based on keratin and collagen;

- thickens the hairs and gives them elasticity.

The hydrogen index (pH) of "Serum 1" (transparent) is 9.0-9.5.

Important! For professional use only!

Use only in combination with "Serum 2" and "Multivitor"!

How to use:

1. Apply Serum 1 to eyebrows or eyelashes.

2. Exposure time: for 3-10 minutes, depending on the condition of the eyebrow or eyelash hair (see instructions for use).

3. Remove the remaining product with a cotton pad moistened with water.

IMPORTANT! Before use, perform an allergy test: apply 2 drops of each product to a small area of ​​skin on the elbow 48 hours before use. If there is no redness, swelling or irritation on the skin, you can proceed with the flexing procedure.

STAGES OF THE EYEBROW FLEXING PROCEDURE

1) Diagnosis of the condition of the client's eyebrow hairs

Determine the exposure time of the flexing products:

• 1st group: eyebrow hairs are thick, hard, coarse, not previously treated with chemicals (dyeing, lightening procedures) - exposure time is 5-8 minutes for Serum 1 and at least 6-8 minutes for Serum 2;

• Group 2: medium-thick eyebrow hairs, natural, healthy or previously treated with chemicals (dyeing, lightening procedures) – exposure time 3-5 minutes for Serum 1 and 6-8 minutes for Serum 2;

• The exposure time of Multivitor is 5 minutes for all hair groups.

IMPORTANT! The maximum exposure time of Serum 1 and Serum 2 is 15 minutes.

IMPORTANT! The activity of Serum 1 and Serum 2 is directly proportional to the air temperature in the room. The higher the temperature, the faster the products will react with the structure of the hairs.

2) Preparation for the eyebrow flexing procedure

1. Determine the condition and structure of the eyebrow hairs in order to correctly calculate the amount of products and exposure time.

2. Use "ÉLAN professional line Cleansing detox mousse for eyebrows and eyelashes with bactericidal effect" to cleanse the hairs and skin before the eyebrow lamination procedure

3) Creating the eyebrow shape (Serum 1)

IMPORTANT! If the client has thin and sensitive skin, it is necessary to apply cream with argan oil TM ELAN professional line to the eyebrows (in a thin layer) and to the skin areas around the eyebrows (in a thick layer). It is recommended to use a professional makeup brush BLACKWOOD #4 TM ELAN professional line.

• Apply Serum 1 to the eyebrows. It is recommended to use a professional makeup brush BLACKWOOD #3 TM ELAN professional line.

IMPORTANT! The maximum exposure time should not exceed the exposure time for the selected group of hairs.

• After the exposure time has elapsed, remove the remaining serum with a cotton pad moistened with water.

IMPORTANT! At the stage of creating the eyebrow shape, it is important to take into account the direction of growth of the client's hairs. The changes should be smooth to avoid kinks.

4) Fixing the direction of hairs (Serum 2)

IMPORTANT! If the client has thin and sensitive skin, it is necessary to apply cream with argan oil TM ELAN professional line to the eyebrows (in a thin layer) and to the skin areas around the eyebrows (in a thick layer). It is recommended to use a professional makeup brush BLACKWOOD # 4 TM ELAN professional line.

• Apply Serum 2 to the eyebrows and distribute it over the entire surface, carefully laying the hairs in the desired direction.

IMPORTANT! The amount of serum used at stage IV should be equal to the amount of serum that was used at stage III of creating the eyebrow shape.

IMPORTANT! The exposure time at stage IV (Serum 2) should be equal to the exposure time at stage III of creating the eyebrow shape (Serum 1), but not less than 6 minutes.

After the exposure time, remove the remaining serum with a cotton pad soaked in water.

If you do not plan to perform an eyebrow tinting procedure after completing the flexing procedure, apply ÉLAN professional line Cleansing detox mousse for eyebrows and eyelashes to your eyebrows with a bactericidal effect" to complete the chemical reaction. Rinse off the foam with a cotton pad soaked in water.

5) Hair care (Multivitor)

1. Apply Multivitor to the eyebrows and spread it over the entire surface. Exposure time: 5 minutes.

2. After the exposure time has elapsed, remove the remaining product with a cotton pad soaked in water.

3. If you plan to perform an eyebrow dyeing procedure after completing the flexing procedure, apply "ÉLAN professional line Cleansing detox mousse for eyebrows and eyelashes with a bactericidal effect" to the eyebrows to complete the chemical reaction. Rinse off the foam with a cotton pad soaked in water.

4. Apply the coloring mixture immediately after using "ÉLAN professional line Cleansing detox mousse for eyebrows and eyelashes with a bactericidal effect".

IMPORTANT! It is necessary to take into account that during the dyeing process the color on the hairs will be brighter and will appear faster.

5. After dyeing, apply "ÉLAN professional line COLOUR FIX fluid-fixer for eyebrows and eyelashes with keratin and sunflower oil" to the eyebrows to fix the result.

6. If after the flexing procedure the eyebrow dyeing procedure is not planned, use "ÉLAN professional line COLOUR FIX fluid-fixer for eyebrows and eyelashes with keratin and sunflower oil" to fix the result.

IMPORTANT! Eyebrow correction is performed only after the flexing procedure. It is recommended to perform the correction with tweezers for less damage to the skin.

EYELASH FLEXING PROCEDURE STAGES

1) Diagnosing the condition of the client's eyelashes

Determine the exposure time of the flexing products according to the points below:

1st group: thick or straight eyelashes - exposure time 3-6 minutes for Serum 1 and at least 6 minutes for Serum 2;

2nd group: medium-thick or thin eyelashes - exposure time 6-10 minutes for Serum 1 and 6-10 minutes for Serum 2;

The exposure time of Multivitor is 5 minutes for all groups of eyelashes.

2) Preparation for the eyelash flexing procedure

1. Determine the condition and structure of the eyelashes to correctly calculate the amount of products and exposure time.

2. Use "ÉLAN professional line Cleansing detox mousse for eyebrows and eyelashes with bactericidal effect" to degrease the hairs before the eyelash flexing procedure.

3. Fix the silicone roller of the required size on the upper eyelid.

4. Distribute and fix the eyelashes on the roller using the fixing gel for eyelash lamination TM ÉLAN professional line and the applicator.

3) Forming the curl of the eyelashes (Serum 1)

• Apply Serum 1 to the area where the curl of the eyelashes is formed. It is recommended to use the professional makeup brush BLACKWOOD #1 TM ELAN professional line.

IMPORTANT! The maximum exposure time should not exceed the exposure time for the selected group of hairs.

• After the exposure time has elapsed, remove the remains of the product with a dry brush in the direction of eyelash growth. It is recommended to use the professional makeup brush BLACKWOOD #2 TM ELAN professional line.

4) Fixing the direction of the eyelash hairs (Serum 2)

• Apply Serum 2 to the area where the curl of the eyelashes was previously formed, for which Serum 1 was previously used. IMPORTANT! The amount of serum used at stage IV should be equal to the amount of serum used at stage III of eyelash curl formation.

IMPORTANT! The exposure time at stage IV (Serum 2) should be equal to the exposure time at stage III of eyelash curl formation (Serum 1), but not less than 6 minutes.

• After the exposure time has elapsed, remove the remaining serum with a dry brush in the direction of eyelash hair growth. It is recommended to use a professional makeup brush BLACKWOOD #2 TM ELAN professional line.

5) Eyelash hair care (Multivitor)

1. Apply Multivitor to the eyelashes. Exposure time: 5 minutes.

2. After the exposure time has elapsed, remove the remaining product and glue with a cotton pad moistened with water.

IMPORTANT! To achieve the most expressive effect and visible result, the technologists of the ÉLAN professional line brand recommend that after completing the eyelash flexing procedure, you should carry out the eyelash tinting procedure using the ÉLAN professional line gel paint in tone 01 black.

3. To complete the chemical reaction, including after the eyelash tinting procedure, apply "ÉLAN professional line Cleansing detox mousse for eyebrows and eyelashes with a bactericidal effect" to the eyelashes. Remove the foam with a cotton pad soaked in water.

4. Apply "ÉLAN professional line Color fixing fluid COLOUR FIX for eyebrows and eyelashes with keratin and sunflower oil" to the eyelashes to fix the result.

RECOMMENDATIONS AFTER THE EYEBROW AND EYELASH FLEXING PROCEDURE

! It is not recommended to carry out the procedure of eyebrow dyeing with henna or to perform the procedure of eyebrow lightening, as the result can be extremely unpredictable: the structure of the hairs can be damaged (overdried hairs without shine), which can cause them to become brittle and fall out.

! For 24 hours after the procedure, avoid visiting a bathhouse, sauna, or solarium, avoid mechanically damaging the shape of your eyebrows and eyelashes (sleeping face down on a pillow), minimize contact with water, and avoid combing your eyebrows and eyelashes.

! For 48 hours after the procedure, avoid exposing your eyebrows to aggressive cosmetics and procedures (scrubs, peels, alcohol-containing lotions, laser procedures).

Shelf life: 24 months.

Shelf life after opening: 6 months.

Ingredients: AQUA, THIOGLYCOLIC ACID, CYSTEAMINE HCL, CETEARYL ALCOHOL, AMMONIUM HYDROXIDE, ETHANOLAMINE, PROPYLENE GLYCOL, MINERAL OIL, ETHYLHEXYL STEARATE, CETRIMONIUM CHLORIDE, SODIUM SULFITE, SODIUM ERYTHORBATE, CETEARETH-20, DIAZOLIDINYL UREA (AND) METHYLPARABEN (AND) PROPYLPARABEN, PARFUM, DISODIUM EDTA, POLYQUATERNIUM-22, HYDROLYZED COLLAGEN, HYDROLYZED KERATIN, DIMETHYLCYCLOHEXENYL 3-BUTENYL KETONE, METHYL DECENOL.