Expert set - eyebrow and eyelash flexing system ELAN "SUPERSONIC 2.0" (with green Serum 1 set)

The professional eyebrow and eyelash flexing kit "SUPERSONIC 2.0" consists of three products - Serum 1 CLEAR, Serum 2 and Serum 3 Multivitor, with which a specialist can quickly create a beautiful curl of eyelashes.

Important! The "SUPERSONIC" eyebrow and eyelash flexing expert system is designed exclusively for professional use!

Important! Serum 1, Serum 2 and Serum 3 Multivitor must be used in combination.

STAGES OF THE EYEBROW FLEXING PROCEDURE

1) Diagnosis of the condition of the client's eyebrow hairs and determination of the exposure time of the flexing products according to the points specified below:

1st group: eyebrow hairs are coarse, hard and dense, not previously treated with chemical compounds (dyeing, lightening procedures) - exposure time is 5-8 minutes for Serum 1 and at least 6-8 minutes for Serum 2;

2nd group: medium-thick eyebrow hairs, natural, healthy or previously treated with chemical compounds (dyeing, lightening procedures) — exposure time 3-5 minutes for Serum 1 and 6-8 minutes for Serum 2;

The exposure time of Multivitor is 5 minutes for all hair groups.

IMPORTANT! The maximum exposure time for Serum 1 and Serum 2 is 15 minutes.

IMPORTANT! The activity of Serum 1 and Serum 2 directly depends on the air temperature in the room. The higher the temperature, the higher the reaction speed.

2) Preparation for the eyebrow flexing procedure. Use "ÉLAN DETOX-MOUSSE 2.0" to cleanse the hairs and skin before the eyebrow flexing procedure. Remove the foam with a cotton pad moistened with water.

3) Creating the eyebrow shape (Serum 1)

IMPORTANT! If the client has thin and sensitive skin, it is necessary to apply cream with argan oil TM ÉLAN professional line to the eyebrows (in a thin layer) and to the skin areas around the eyebrows (in a thick layer).

1. Apply Serum 1 to the eyebrows. Exposure time is 3-8 minutes.

IMPORTANT! The maximum exposure time should not exceed the exposure time for the selected group of hairs.

2. After the exposure time has elapsed, remove the remaining product with a cotton pad moistened with water.

IMPORTANT! When creating the eyebrow shape, the direction of growth of the client's hairs should be taken into account. The changes should be smooth to avoid kinks.

4) Fixing the direction of hairs (Serum 2)

IMPORTANT! If the client has thin and sensitive skin, it is necessary to apply cream with argan oil TM ÉLAN professional line to the eyebrows (in a thin layer) and to the skin areas around the eyebrows (in a thick layer).

1. Apply Serum 2 to the eyebrows and distribute it over the entire surface of the hairs, carefully laying them out in the desired direction. Exposure time is 6-8 minutes.

IMPORTANT! The exposure time at stage IV (Serum 2) should be equal to the exposure time at stage III of creating the eyebrow shape (Serum 1), but not less than 6 minutes.

2. After the exposure time has elapsed, remove the remaining product with a cotton pad soaked in water if you plan to perform an eyebrow tinting procedure after completing the flexing procedure.

3. After the exposure time has elapsed, remove the remaining product with a cotton pad soaked in ÉLAN DETOX-MOUSSE to complete the chemical reaction if you do not plan to perform an eyebrow tinting procedure after completing the flexing procedure. Rinse off the foam with a cotton pad soaked in water.

5) Hair care (Multivitor)

1. Apply Multivitor to the eyebrows and distribute it over the entire surface of the hairs. Exposure time: 5 min.

2. After the exposure time has elapsed, remove the remaining product with a cotton pad soaked in water if you do not plan to color your eyebrows after the flexing procedure.

3. After the exposure time has elapsed, remove the remaining product with a cotton pad soaked in ÉLAN DETOX-MOUSSE to complete the chemical reaction if you plan to color your eyebrows after the flexing procedure. Rinse off the foam with a cotton pad soaked in water.

4. Apply the coloring mixture to your eyebrows immediately after using ÉLAN DETOX-MOUSSE.

IMPORTANT! Please note that during the coloring process, the color on the hairs will be brighter and will appear faster.

5. After coloring, apply ÉLAN professional line Color Fixing Fluid COLOUR FIX 2.0 to your eyebrows to secure the result.

IMPORTANT! Eyebrow correction is performed only after the flexing procedure. We recommend performing the correction with tweezers to minimize damage to the skin.

STAGES OF THE EYELASH FLEXING PROCEDURE

1) Diagnosis of the client's eyelashes and determination of the exposure time of the flexing products according to the points listed below:

1st group: thick or straight eyelash hairs - exposure time of 6-10 minutes for Serum 1 and at least 6 minutes for Serum 2;

2nd group: medium-thickness or thin eyelash hairs - exposure time of 3-6 minutes for Serum 1 and at least 6 minutes for Serum 2;

The exposure time of Multivitor is 5 minutes for all groups of hairs.

IMPORTANT! The maximum exposure time of Serum 1 and Serum 2 is 15 minutes.

IMPORTANT! The activity of Serum 1 and Serum 2 directly depends on the air temperature in the room. The higher the temperature, the higher the reaction rate.

2) Preparation for the eyelash flexing procedure

1. Use ÉLAN DETOX-MOUSSE to degrease the hairs before the eyelash flexing procedure. Remove the foam with a cotton pad moistened with water.

2. Fix the silicone roller of the required size on the upper eyelid.

3. Distribute and fix the eyelashes on the roller with the fixing gel for eyelash lamination TM ÉLAN professional line and the applicator.

3) Forming the curl of the eyelashes (Serum 1)

1. Apply Serum 1 to the area where the curl of the eyelashes is formed. The exposure time is 3-10 minutes.

IMPORTANT! The maximum exposure time should not exceed the exposure time for the selected group of hairs.

2. After the exposure time has elapsed, remove the remains of the product with a dry brush in the direction of eyelash growth.

4) Fixing the direction of the eyelashes (Serum 2)

1. Apply Serum 2 to the entire eyelash area in a thick layer. The exposure time is 6-10 minutes.

IMPORTANT! The exposure time at stage IV (Serum 2) should be equal to the exposure time at stage III of eyelash curl formation (Serum 1), but not less than 6 minutes.

2. After the exposure time has elapsed, remove the remaining product with a dry brush in the direction of eyelash growth.

5) Eyelash care (Multivitor)

1. Apply Multivitor to the entire eyelash area. Exposure time: 5 minutes.

2. After the exposure time has elapsed, remove the remaining product and fixing gel with a cotton pad moistened with water.

IMPORTANT! To achieve the most expressive effect and visible result, technologists of the ÉLAN professional line brand recommend performing the eyelash tinting procedure after completing the eyelash flexing procedure.

3. To complete the chemical reaction, including after eyelash tinting, apply "ÉLAN DETOX-MOUSSE 2.0" to the eyelashes. Remove the foam with a cotton pad moistened with water.

4. Apply ÉLAN professional line COLOUR FIX 2.0 fluid fixer for eyebrows and eyelashes to the eyelashes.

RECOMMENDATIONS AFTER THE EYEBROW AND EYELASH FLEXING PROCEDURE

! We do not recommend the eyebrow coloring procedure with henna or the eyebrow lightening procedure, since the result can be completely unpredictable: the structure of the hairs can be damaged, which can lead to their fragility and loss.

! Within 24 hours after the procedure, you should avoid visiting a bathhouse, sauna and solarium, and also avoid mechanically damaging the shape of the eyebrows and the curl of the eyelashes (sleep face down in the pillow), minimize contact with water, and do not comb the eyebrows and eyelashes.

! Within 48 hours after the procedure, you should avoid exposure of the eyebrows and eyelashes to aggressive cosmetics and procedures (scrubs, peels, alcohol-containing lotions, laser procedures).

LIMITATIONS OF THE EYEBROW AND EYELASH FLEXING PROCEDURE

Absolute limitations to the eyebrow and eyelash flexing procedure: individual sensitivity to the components in the composition of the products, any damage to the skin in the eyebrow and eye area, redness, rash of any etiology, as well as visiting a solarium, laser and photo procedures 24 hours before the procedure.

PRECAUTIONS

Before use, it is necessary to perform an allergy test: apply 2 drops of each product to a small area of ​​​​skin on the elbow 48 hours before use. If there is no redness, swelling or irritation on the skin, you can begin the flexing procedure.

Serum 1 contains thioglycolate. Serum 2 contains hydrogen peroxide. Products may cause an allergic reaction. Use protective gloves. Do not use metal objects when working with products. Avoid contact with eyes. In case of contact with eyes, rinse immediately with water. If an allergic reaction occurs, be sure to consult a dermatologist.

Composition: “SUPERSONIC 2.0” Serum 1 CLEAR: AQUA, THIOGLYCOLIC ACID, CYSTEAMINE HCL, CETEARYL ALCOHOL, AMMONIUM HYDROXIDE, ETHANOLAMINE, PROPYLENE GLYCOL, MINERAL OIL, ETHYLHEXYL STEARATE. CETRIMONIUM CHLORIDE, SODIUM SULFITE, SODIUM ERYTHORBATE, CETEARETH-20, DIAZOLIDINYL UREA (AND) METHYLPARABEN (AND) PROPYLPARABEN, PARFUM, DISODIUM EDTA, POLYQUATERNIUM-22, HYDROLYZED COLLAGEN, HYDROLYZED KERATIN, DIMETHYLCYCLOHEXYL 3-BUTENYL KETONE, METHYL DECENOL, MICA (AND) CI 45410 (AND) LAUROYL LYSINE.

"SUPERSONIC 2.0" Serum 2: AQUA, CETYL ALCOHOL, GLYCERIN, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, PARAFFINUM LIQUIDUM, CERATONIA SILIQUA (CAROB) SEED EXTRACT, HYDROLYZED SOY PROTEIN, HYDROLYZED COLLAGEN, POLYQUATERNIUM-7, POLYQUATERNIUM-16, ZEA MAYS (CORN) STARCH, ARGANIA SPINOSA KERNEL OIL, CETEARETH-33, TETRASODIUM EDTA, PHOSPHORIC ACID, SODIUM BENZOATE, BENZOIC ACID, PHENOXYETHANOL, POTASSIUM SORBATE.

"SUPERSONIC 2.0" Multivitor: AQUA, CETEARYL ALCOHOL, GLYCERIN, ISOPROPYL PALMITATE, PARAFFINUM LIQUIDUM, CYCLOPENTASILOXANE, BETAINE, HYDROLYZED WHEAT PROTEIN, HYDROLYZED SOY PROTEIN, CETEARETH-20, PEG-8, PEG-8/SMDI COPOLYMER, SODIUM POLYACRYLATE, CETRIMONIUM CHLORIDE, DIMETHICONOL, BHT, PALMITOYL MYRISTYL SERINATE, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, PARFUM, CITRIC ACID, BENZYL SALICYLATE, HYDROXYCITRONELLAL, Cl 60730.

Expiration date: 24 months Shelf life after opening: 6 months