Eyelash lamination tool STALEKS PRO EXPERT 10 / silver

The Staleks tool for eyelash lamination Pro EXPERT 10 helps position lashes on rollers during lamination or perm procedures. The thin pointed working edge is perfect for working with individual lashes, separating them, and gently pressing them to the rollers.

The multifunctional Staleks tool for eyelash curling Pro EXPERT 10 is made from high-alloy stainless steel with an L-shaped working part, curved at 135 degrees. The specially designed shape and length of the tip are suitable for working with any eyelash length.

The Staleks Pro EXPERT 10 tool has a handle with notches, providing a comfortable and stable grip for the master, preventing slipping during the procedure.

It is recommended to purchase the Staleks PRO EXPERT 10 tool for eyelash lamination and curling together with rollers, tweezers, lamination products, and aftercare, ensuring a full set of tools for the procedure.

Features of the Staleks tool for eyelash lamination Pro EXPERT 10:

• for eyelash care procedures;

• convenient for working with any eyelash length;

• material — high-alloy stainless steel;

• handle with notches for stability in the master’s hand;

• suitable for disinfection;

• resistant to sterilization in dry heat and autoclaves;

• diameter — 5.9 mm;

• total length — 130 mm, working part — 7 mm;

• bending angle of 135 degrees;

• weight — 20 g.

Staleks tool for eyelash curling Pro EXPERT 10 — usage:

1. Choose the appropriate size roller that fits snugly against the client’s eyelid. Apply adhesive to the surface to fix the lashes.

2. Gently run the L-shaped tool over the lashes, pressing them to the adhesive-covered surface of the roller. Start from the inner corner of the eye.

3. The fixation occurs gradually: move the working part from the base of the lashes to the tips, ensuring tight contact of the hairs with the roller.

4. Use the thin working part to arrange the lashes parallel to each other. In case of crossing or uneven placement, the tool allows delicate correction without damaging the shape.

5. Once all the lashes are evenly placed on the roller, check for uniform pressure.

Cleaning recommendations:Staleks tools can withstand all types of disinfection and sterilization (cold or hot).

• Immediately after use, carefully remove contaminants from the surface. Use an adhesive remover for eyelash extensions — it effectively removes glue while preserving the tool’s surface.

• Prepare a disinfectant solution according to the manufacturer's instructions regarding time and concentration. It is recommended to choose products that destroy hepatitis B, C viruses, and dermatophytes.

• Sterilization. Place the tool in a sterilization pouch for dry heat or containers for autoclaves, ensuring proper air or steam circulation. In dry heat: at 180°C for 60 minutes, 160°C for 150 minutes.

• When using an autoclave, sterilization time: at 120°C, pressure of 1.1 atm. for 45 minutes; 132°C, pressure of 2 atm. — 20 minutes. After autoclaving, allow the tool to cool for 1 hour to avoid damage from sudden temperature changes.

• Regularly check the performance of the autoclave or dry heat sterilizer using biological indicators to ensure effective sterilization.

Storage features:

• Store the tool in a dry, clean state in a sterile, closed container. Choose a dry storage area to avoid rust and mold.

• Avoid drops, exposure to moisture, dust, granular, and abrasive substances.