Gel-chewing gum for nail design F.O.X / Slime Gel / Clear, 10 ml (jar)

F.O.X Slime gel is a plastic gel for voluminous designs.

When creating compositions, it does not spread and keeps even a complex given shape. During use, it does not stick to the fingers and easily takes the desired shape.

When working with it, it is easy to create modern designs and art elements on the nails without additional tools. You can create a design under the gel polish coating, use it in the "Aquarium" technique for internal designs, and also as a surface design on the finished nail.

APPLICATION TECHNOLOGY

Technique No. 1 "Under gel polish":

1. Standard preparation of the nail plate

2. Apply F.O.X Nail Prep degreaser to the damaged surface of the nail;

3. Apply F.O.X Ultrabond — an acid-free primer for additional adhesion;

4. On the prepared nail, reinforced with a base or gel, on a sticky layer, or with the dispersion removed, lay out a volume element with Slime gel

5. Polymerize in a 36/48W LED lamp - 2x.

6. Cover with the 1st or 2nd layer of the selected gel polish, and polymerize in a 36/48W LED lamp – 1 min (each layer)

7. Cover with the selected finish coating and polymerize in a 36/48W LED lamp – 1 minute.

8. Apply F.O.X Dry Cuticle Oil Oasis cuticle oil.

Technique No. 2 "On the finished nail"

1. Standard preparation of the nail plate

2. Apply F.O.X Nail Prep degreaser to the damaged surface of the nail;

3. Apply F.O.X Ultrabond — an acid-free primer for additional adhesion;

4. Apply the formed design with Slime gel on the finished nail, covered with the finishing coating, and polymerize in a 36/48W LED lamp - 2 minutes.

5. If desired, you can paint with gel varnish or gel paint (dry in a 36/48W LED lamp - 1 minute) and cover with the desired top along the contour.

6. Paint the design with a thin brush along the contour and at the point of attachment to the nail plate with the selected top - polymerize in a 36/48W LED lamp - 1 min.

7. Cover with the 1st or 2nd layer of the chosen gel polish, and polymerize in a 36/48W LED lamp – 1 minute (each layer)

8. Cover with the selected finish coating and polymerize in a 36/48W LED lamp – 1 minute.

9. Apply F.O.X Dry Cuticle Oil Oasis cuticle oil.

The volumetric element is removed with nippers or sawdust.