Oxidative emulsion 2% ELAN 30 ml / black-brown tube

Oxidizing emulsion 2% is one of the components of the author's eyebrow coloring system SMART EYEBROW DYING SYSTEM.

Oxidizing emulsion 2% is designed for mixing with Deep Brow Tint 2.0 eyebrow dye and Eyebrow Tint Color Booster 2.0 concentrate boosters.

Provides ideal coloring results thanks to its balanced composition and soft creamy texture.

The finished color mixture has a neutral pH value, so the coloring procedure does not injure the hairs or dry out the skin.

STEPS OF EYEBROW DYING

1) Preparation for the coloring procedure

Use ELAN DETOX-MUSS to degrease hair and skin before eyebrow coloring or modeling procedures. Remove foam using a cotton pad moistened with water.

2) Shaping the eyebrows

Create the shape of your eyebrows using any product convenient for this purpose.

3) Preparation of the coloring mixture

Mix eyebrow dye “Deep Brow Tint 2.0” with Oxidizing emulsion 2% in a 1:1 ratio in a non-metallic container. If there is a need to give the colors of the main paint palette additional depth and greater saturation or to create a new shade, use the appropriate booster concentrate “Eyebrow Tint Color Booster 2.0” according to the mixing proportion below:

Eyebrow dye (49%) + oxidizing emulsion (49%) + booster concentrate (2%) = color mixture (100%)

IMPORTANT! The color of the paint in the bottle/tube may vary from light brown to black as a result of the product being exposed to air after opening the package. This is the norm for the dyes included in the composition and absolutely does not affect the result of eyebrow dyeing or the reproducibility of this result when periodically using the same composition of the dye mixture.

IMPORTANT! The more booster concentrate used, the closer the final shade will be to the booster color (blue or orange).

4) Eyebrow tinting

Apply the coloring mixture to the eyebrows according to the created shape. Depending on the desired result, leave the paint on for 5-10 minutes. After the specified time has passed, wash off the remaining dye mixture using a cotton pad moistened with water. If the color mixture has gone beyond the desired shape, remove the excess with a cotton swab moistened with ELAN SKIN COLOR REMOVER.

5) Completion of the eyebrow tinting procedure

To consolidate the result, apply ELAN COLOR FIX to the eyebrows.

PRECAUTIONARY MEASURES

The oxidizing emulsion contains hydrogen peroxide. Eyebrow dye and booster concentrate contain phenylenediamines, phenylenediamines (toluenediamines), resorcinol.

Before use, 48 hours before use, you must perform an allergic reaction test: mix 2 drops of paint and oxidizing emulsion and apply the mixture to a small area of skin on the elbow. If there is no redness, swelling or irritation on the skin, you can start coloring.

For professional use only. Hair dyes can cause severe allergic reactions. Read and follow the instructions for use.

These products are not intended for use by persons under 16 years of age. A temporary black henna tattoo may increase the risk of allergies.

Do not use paint if you have:

- rash on the face or sensitive, irritated or damaged scalp;

- there was any reaction after dyeing your hair;

- there was a reaction to a temporary “black henna” tattoo in the past.

Use protective gloves. Do not use metal objects while working with the product. Do not use to color eyelashes. For external use only. Avoid contact with eyes. In case of contact with eyes, rinse them immediately with water. After application, rinse thoroughly. If an allergic reaction occurs, be sure to consult a dermatologist.

Ingredients: AQUA, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, GLYCERIN, CETEARETH-20, PARAFFINUM LIQUIDUM, ETHYLHEXYL STEARATE, ARGANIA SPINOSA KERNEL OIL, CETRIMONIUM CHLORIDE, HYDROLYZED COLLAGEN, TETRASODIUM PYROPHOSPHATE, DISODIUM EDTA , SODIUM STANNATE, CITRIC ACID, PHOSPHORIC ACID, SODIUM CARBONATE SODIUM HYDROXIDE.

Shelf life: 24 months

Shelf life after opening: 3 months

Country of origin: Türkiye

Volume: 30 ml