Oxidative emulsion 3.5% ELAN 30 ml / bronze tube

The oxidizing emulsion is designed to be mixed with the following ÉLAN professional line eyebrow lightening and coloring cosmetics:

• Author's eyebrow tinting system “Smart Brow Tinting System”

• Eyebrow gel color ÉLAN

• Ultramarine eyebrow lightening powder

• Carbon powder for eyebrow lightening

STEPS OF EYEBROW DYING

1) Preparation for the staining procedure. To degrease hair and skin before eyebrow coloring or modeling procedures, you should use “ÉLAN DETOX-MOUSSE”. Remove any remaining product using a cotton pad moistened with water.

2) Constructing the shape of the eyebrows. Shape your eyebrows using any convenient product.

3) Preparation of the coloring mixture. Mix the author's eyebrow coloring system “SBTS” or ÉLAN eyebrow gel dye with “Oxidative emulsion 3.5%” in a 1:1 ratio in a non-metallic container.

If you need to give the colors of the main color palette of the author's eyebrow coloring system "SBTS" additional depth and greater saturation or create a new shade, you should use the appropriate booster concentrate "Eyebrow Tint Color Booster 2.0" according to the mixing proportion below:

Eyebrow dye (49%) + oxidizing emulsion (49%) + booster concentrate (2%) = color mixture (100%)

4) Eyebrow tinting. Apply the coloring mixture to the eyebrows according to the created shape. Depending on the desired result, leave the original SBTS eyebrow coloring system for 5-10 minutes, ÉLAN eyebrow gel dye for 5-15 minutes. When the specified time is up, wash off the remaining dye mixture using a cotton pad moistened with water. If the coloring mixture has gone beyond the expected shape, remove the excess with a cotton swab moistened with ÉLAN REMOVER.

5) Completion of the eyebrow tinting procedure. To consolidate the result, apply “ÉLAN COLOR FIX” to your eyebrows.

PRECAUTIONARY MEASURES

Eyebrow dye and booster concentrate contain phenylenediamines, phenylenediamines (toluenediamines), resorcinol.

48 hours before use, you need to perform an allergy test: mix 2 drops of paint and oxidizing emulsion and apply the mixture to a small area of ​​skin on the elbow. If there is no redness, swelling or irritation on the skin, you should start coloring.

For professional use only. Hair dyes can cause severe allergic reactions. Read and follow the instructions for use. These products are not intended for use by persons under 16 years of age. A temporary black henna tattoo may increase the risk of allergies.

Do not use paint if you have:

– rash on the face or sensitive, irritated or damaged scalp;

– there was any reaction after dyeing your hair;

– was a reaction to a temporary “black henna” tattoo in the past.

Use protective gloves. Do not use metal objects while working with the product. Not for tinting eyelashes. For external use only. Avoid contact with eyes. In case of contact with eyes, rinse them immediately with water. After application, rinse thoroughly. If an allergic reaction occurs, be sure to consult a dermatologist.

STEPS OF EYEBROW LIGHTENING

1. Mix oxidative emulsion 3.5% TM ÉLAN professional line with carbon or ultramarine eyebrow lightening powder in a 2:1 ratio (two parts oxidative emulsion and one part powder).

2. First, apply the lightening mixture to thicker hairs, then use a brush to distribute it over the entire surface of the eyebrows.

3. Depending on the desired result and hair thickness, leave the lightening mixture on the eyebrows for 3-15 minutes.

4. When the desired result is achieved, remove the lightening mixture using a cotton pad soaked in water.

5. If you want to get a lighter shade, repeat the procedure.

6. To complete the chemical reaction, apply ÉLAN DETOX-MOUSSE to your eyebrows and remove the foam with a damp cotton pad.

7. To consolidate the result, apply the COLOR FIX fluid-fixer, which contains keratin and sunflower oil, to the eyebrow hairs.

If necessary, perform eyebrow tinting or dyeing.

Important: after lightening the eyebrow hairs, it is not recommended to carry out the standard eyebrow tinting procedure. If you use eyebrow dye and oxidizing agent in a 1:1 ratio, the eyebrow hairs will turn black.

Storage conditions: store in a dry place, out of reach of children, at a temperature from +5°C to +25°C. Avoid exposure to direct sunlight.

Shelf life: 24 months

Shelf life after opening: 3 months

Ingredients: AQUA, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, GLYCERIN, CETEARETH-20, PARAFFINUM LIQUIDUM, ETHYLHEXYL STEARATE, ARGANIA SPINOSA KERNEL OIL, CETRIMONIUM CHLORIDE, CITRIC ACID, PHOSPHORIC ACID, TETRASODIUM PYROPHOSPHATE, UM EDTA, SODIUM STANNATE, SODIUM CARBONATE, SODIUM HYDROXIDE .