Wax heater mini Sferakosmetiki - Mini Wax Heater - white

Compact wax heater for facial and eyebrow hair removal

This miniature wax heater is designed specifically for delicate areas—ideal for facial and eyebrow hair removal.

It takes up minimal space, helps optimize your workspace, and replaces bulky devices.

Thanks to the universal Type-C port, it runs on a charger, power bank, or laptop, making it convenient for mobile use.

The mini-wax melter does not have a temperature regulator, but the device supports automatic heating at a level of about 115±10°C. It is worth considering that this is the temperature of the wax melter itself - in the silicone bowl and in the wax itself it will be lower.

The optimal working temperature of the wax is approximately 45–50°C. The material should be warm enough to be evenly applied in a thin layer, but not so hot as to cause a burn.

Before the procedure, it is recommended to test the wax - apply a small amount to the inside of the wrist to make sure that the temperature is comfortable for the client.

Note: Power adapter not included.

Specifications:

Dimensions: 52×40 mm

Power: 7 W

Voltage: 5 V

Current: 1.5 A

Capacity: 8 g of wax

Maximum temperature: 120±10°C

Heat-up time: ~15 minutes

Operating Instructions

Step 1: Preparing the wax

1. Open the wax heater lid.

2. Pour the desired amount of wax into the silicone bowl.

Step 2: Heating the wax

1. Connect the device to a power source via USB Type-C.

2. The wax melter will begin to heat up (red indicator).

3. After about 15 minutes, the indicator will turn green – the wax is ready to use.

4. Stir the wax with a spatula to ensure even melting.

5. Test the temperature on your wrist before applying.

Recommendation: Use a power adapter with a 5V, 2A or higher current. Melting will take longer with a current lower than 1.5A. If the wax has not melted completely, stir it with a spatula.

Step 3: Removing Hair with Wax

1. Apply a thin layer of wax with a spatula in the direction of hair growth.

2. Wait a few seconds for the wax to harden.

3. Stretch the skin taut with one hand, and with the other, quickly peel off the wax in the opposite direction of hair growth.

4. Repeat on other areas as needed.

Step 4: Care and Storage

1. After waxing, apply oil to soothe the skin.

2. Unplug the device and let it cool.

3. Clean any wax residue from the silicone cup.

4. Store in a dry place or box.

Precautions:

- Use only for melting hard wax.

- Do not use if the cable or housing is damaged.

- Avoid contact with water.

- Do not leave the device unattended during operation.

- Keep out of reach of children.

Package Contents:

- Wax heater

- Replacement silicone cups

- USB Type-C cable

With the Mini Wax Heater, facial and eyebrow waxing becomes even easier, faster, and more comfortable.